Licensed Florida contractor · CBC 1263773(239) 778-9857[email protected]
Home / Guides / Planning outdoor living into a new custom home
Guide

Planning outdoor living into a new custom home

Why motorized louvered roofs, screens and outdoor kitchens belong in the architectural plans, not added after the certificate of occupancy.

Design it in while the house is on paper

The best outdoor rooms are planned with the house: beam heights line up with the roofline, drainage runs into the site plan, and electrical for motors, lighting and heaters is roughed in before drywall. Adding the same structure later usually means compromises on span, height and tie-in.

Structure and wind loads

In coastal Florida every attached or freestanding roof is engineered to the Florida Building Code wind design for that exact address. When the outdoor structure is part of the home's permit set, the engineer of record and our engineering team coordinate loads and attachment details once.

Power, lighting and controls

Motorized louvers and screens need dedicated circuits and a control plan. We coordinate rain and wind sensors, app control, lighting, fans and heaters with the electrical drawings so everything runs from one system.

Water management

STATTUS louvers channel rain through integrated gutters into the columns. Planning where that water exits — into the site drainage, not across the pool deck — is a five-minute conversation during design and an expensive fix later.

One team, one schedule

When the same team builds the home and manufactures the outdoor living system, there is no gap between contractors at the end of the job. The outdoor room is finished with the house, not months after.

More guides: Motorized louvered roof vs. traditional screen enclosure · Hurricane-ready outdoor living in coastal Florida

Start a project

Start your legacy home

Tell us about your lot, your plans or your existing home. Your request goes directly to Pavel Krutakov.